Setting Up the Sea Sucker Bike Rack...

Setting Up the Sea Sucker Bike Rack

In a previous post, I wrote about all of the problems that I have encountered with my Trek Hybrid 7.2 FX bike after my bike sat in the garage of my mom's house for a couple of years. I also wrote about taking my bike over to Southwest Bicycles in Peoria, AZ for maintenance. Furthermore, I also wrote about buying the Sea Sucker Talon rooftop bike rack from REI. 

This past Saturday, I F-I-N-A-L-L-Y got around to setting up the Sea Sucker Talon bike rack on my car.

After watering the plants in the backyard, sweeping off the patio, and cleaning out the garage at my mom's house, I went ahead and took the opportunity to set up the Sea Sucker Talon bike rack on the roof of my car. Since it was a H-O-T afternoon (115 degrees Fahrenheit) in the Sun City, AZ area, I was already sweating like crazy. Since I had nothing else planned for the afternoon, it was the perfect opportunity to set up the bike rack.

I had already completed most of the preparation work before mounting the bike rack to the roof of my car.

• I had already watched a couple of videos on Sea Sucker's own website on how to set up the Talon bike rack.
• I also sat down and actually read through the instructions.
• Lastly, I had already tried mounting the front of my Trek Hybrid 7.2 FX bike on the Talon bike rack on the floor of my mom's garage.

With all of that work completed, it was now time to actually set up the Sea Sucker Talon bike rack on the roof of my car. I was motivated to set up the bike rack for two reasons. First, I am starting to get incredibly bored with using the elliptical trainer at the gym. Spending longer than 20 minutes on the elliptical trainer no longer appeals to me. I start to get incredibly BORED. Second, since my failed attempt at mounting my brand new rear tire to the bike frame ended in disaster back in May, my Trek Hybrid bike has been collecting dust in my mom's garage.

Thus, it was a now or never type of moment.

As the videos from Sea Sucker made clear, setting up the Talon bike was actually fairly easy to do.

Here are the steps that I followed to set up the Talon 1-Bike Rack:

1. I securely mounted the the HUSKE QR Fork Mount onto the front rack body.
2. I then wiped clean the area on the roof of my car where I was going to place the front rack body.
3. I then removed the protective covers for the suction cups on the front rack body.
4. While holding down the front rack body, I then pressed the pump for each suction cup repeatedly until the orange indicator band was no longer visible.
5. I then inserted the skewer into the opening of the HUSKE QR Fork Mount with the QR Washer next to the Cam Lever.
6. I then attached the Adjustment Nut to the skewer.
7. I then removed the front tire from my bike.
8. I then lifted my bike onto the roof of my car.
9. I then mounted the front tire dropouts of my bike onto the skewer.
10. I then tightened the Adjustment Nut on the skewer as tight as possible against the bike fork.
11. I then loosened the Adjustment Nut until I was able to close the Cam Lever.
12. After removing the the protective cover for the suction cup, I then placed the rear rack body under the rear tire of my bike.
13. Again, I then pressed the pump for the suction cup until the orange indicator band was no longer visibile.
14. I then wrapped the velcro strap to secure the tire to the rear rack body.
15. To prevent the pedals from moving around during travel, I then used the orange velcro strap to secure the pedal to the bike frame.

Before I knew it, I had mounted my bike to the Sea Sucker Talon bike rack on the roof of my car. It was pretty easy.

The most difficult part of setting up the Talon bike rack was mounting the bike to the forward base.

My bike successfully mounted to the Sea Sucker bike rack. 

Close up of the suction cups used in the Sea Sucker bike rack.

The Sea Sucker Talon bike rack on the roof of my car. 

Rear view of the Sea Sucker Talon bike rack. 

I then started my car and cautiously left the parking lot at my mom's house. I then drove around the neighborhood for a little bit. My bike appeared to be securely mounted to the Sea Sucker bike rack. Additionally, the Sea Sucker bike rack appeared to be securely mounted to the roof of my car. I then decided to drive over to Southwest Bicycles in nearby Peoria, AZ. Despite all of the potholes and bumps in the road, I managed to drive my car to the parking lot for Southwest Bicycles without incident. It was an easy task to remove my bike from the Talon bike rack, so I could remount the front tire. Removing the front and rear racks was easy. I just pressed the rubber tab for each suction cup. I then removed both racks and placed them into my trunk for storage. An important point to remember is that the Sea Sucker bike rack is not secure. There is no way to lock the Sea Sucker Talon bike rack to prevent someone from stealing it. 

Arriving at the parking lot for Southwest Bicycles in Peoria, AZ.

In Conclusion

Thus far, I have been impressed with the Talon bike rack from Sea Sucker. This particular bike rack saved me from having to spend several hundreds of dollars on a roof rack for my car. Eventually, I would like to use the Talon bike rack to take my bike down to, say, downtown Phoenix for a bike ride. We'll see if it passes that test.